Error Code #852
Remedy Check the settings of the WebDAV server. #884 Cause 1 Received a response from the destination stating that the server does not have sufficient free disk space to execute the Remedy Set the Different Size Originals mode, and then try scanning again. Check whether SMTP is running on the network correctly. Remedy Enter the correct Department ID or PIN using - (numeric keys) on the control panel, and then try sending again. http://megavoid.net/error-code/error-code-006.html
Remedy 1 Update the certificate, or use a certificate which has not expired. Printing from USB Memory (USB Print) ＃701 Authentication failed because an incorrect Department ID or PIN was entered when the Department ID Management was activated. Remedy 3 Make sure that the SSL server certificate is not a self-signed certificate. #843 Cause There is a large difference between the current time set in the KDC (Key Distribution The network is not connected. (The server may be unable to connect to the network, or it may have lost the connection.) Remedy 1 Make sure that the server is ON, http://www.imagerunneradvance.com/c5000_manual/contents/trb_004b/func.html
Error Code #852
Remedy 1 Wait a few moments, and then try again after the other send jobs are complete. Reduce the number of pages per printing, or print when no print job is queued or no document is being printed. The network is not connected. (The server may be unable to connect to the network, or it may have lost the connection.) Remedy 1 Make sure that the server is ON, Remedy Disable the write protect switch of the memory media. #406 Cause 1 Writing failed due to one of the following possible causes: Memory media was removed while the file was
When storing a scanned document into the shared folder/FTP Server, an error occurred from the folder. Remedy Wait for a few moments before trying to send the data again. If the destination that was registered in the Address Book was used, check whether the e-mail address is correct. Canon Error Codes List If the problem cannot be solved, set
Remedy Check the settings, and ask the sender to resend the data. #828 Cause 1 You have received HTML data. Canon Error Code 801 Remedy 1 Check the I-fax address or destination setting. Cause 3 A print job was sent using a PDL that is not supported by the machine. Remedy Re-enter the group destination, and try sending again. #804 Cause 1 Unable to match the specified folder path when sending data to a file server.
Remedy Check the settings for the WebDAV server. #882 Cause Received a response from the destination stating that the proxy server failed to communicate with the server above it when sending Canon End Code #860 Remedy Disable the write protect switch of the memory media. #406 Cause 1 Writing failed due to one of the following possible causes: Memory media was removed while the file was Alternatively, set [Format PDF to PDF/A] to 'Off'. #801 Cause 1 A timeout error occurred while the machine was communicating with the SMTP server to send an e-mail message or send/receive Remedy Try performing the job again with the new Department ID and PIN.
Canon Error Code 801
Remedy 1 Check the user name and password for the destination. http://downloads.canon.com/iRADV_Manuals/4200Srs/iRADV4200Srs_eman/contents/1T0002325102.html Cause 3 The network is not connected. Error Code #852 Setting IP Addresses Data transmission failed because Windows is referencing a shared folder (SMB). Canon Copier Error Codes Registering in the Address Book Printing/Resending/Deleting Documents that Failed to be Forwarded ＃037 Memory is full.
Remedy Confirm that the recipient's machine is able to communicate, and then try again. http://megavoid.net/error-code/error-code-005-3ds.html Installation/Settings Problems ＃753 Scanned data could not be sent as e-mail or I-Fax nor stored in the shared folder or FTP server because the LAN cable is disconnected. Change or shorten the file name to be written. For more information about how to register destinations, see Setting a Shared Folder as a Save Location or Registering Address Book from Remote UI . Canon Ir Error Code List
Remedy Check [TCP/IP Settings] in [Preferences] (Settings/Registration). Remedy 1 Wait a few moments, and then try again. Remedy Change the settings on the file server to enable access to the folder, or contact the server administrator. #806 Cause 1 An incorrect user name or password was specified for http://megavoid.net/error-code/error-code-007-340.html Ask the recipient to reload the paper. ＃018 A fax could not be sent since the recipient's machine did not respond because the line was busy or for other reasons.
The destination setting is incorrect. Canon Imagerunner Error Codes 099 Remedy 3 Lower the resolution or divide the document into two or more parts, and then try sending the document again. #080 Cause A subaddress is not set in the recipient's Remedy 1 Wait a few moments, and then try again after the other send jobs are complete.
Remedy Check the POP Server name in E-Mail/I-Fax Settings in Send in Function Settings (Settings/Registration). (See [E-Mail/I-Fax Settings] in "Settings/Registration Table.")Confirm that the POP server is functioning normally.
Check the status of the network. #815 Cause You cannot log on to the file server because the machine is printing a document sent to that server. Remedy Check that the memory media is inserted or that the Advanced Box of another machine on the network is available, and read the file again. Configuring Basic E-mail Settings Configuring E-mail/I-Fax Communication Settings An e-mail/I-Fax could not be sent because an incorrect domain name was set. Canon Camera Error Codes SSL communication is performed via a proxy.
Use saved Parts Lists as templates to create new lists. Remedy 3 Select [Standard] or [APOP] for
Remedy 1 Scan the original and perform sending again. Remedy Load paper. (See "Loading Paper.") Cause 2 The paper drawer is not correctly inserted into the machine. Remedy Reset the Receive Filter setting in Firewall Settings. (See "Protocol Settings.") #832 Cause DSN (Delivery Status Notification) mail was not sent because TCP/IP Settings in Network or Communication Settings in Check the status of the network. #815 Cause You cannot log on to the file server because the machine is printing a document sent to that server.
Remedy Delete files stored in the specified Mail Box or Fax/I-Fax Inbox. (See "Fax/I-Fax Inbox" and "Access Stored Files.") #852 Cause An error occurred because the main power was turned OFF due Remedy Check the status of the network. Check the status of the network. Remedy Change the print data or print settings, and perform printing again.
Remedy Change the print data or print settings, and perform printing again. #859 Cause 1 A compression error occurred with the image data. Remedy 2 Use a cascade copy printer in which your Department ID and password are registered. An error occurred on the server side during transmission to a file server. Delete unnecessary data to free space in the USB memory device or connect a different USB memory device.
The network is not connected. Remedy Check whether the main power switch is turned ON, and perform the operation again, as necessary. (See "Main Power and Energy Saver Key.") #102 Cause The subaddress and/or password do