Error Code 0608 In Aix
If you do see a bootp request coming in but still do not get a receipt from the client side you should contact the support center for further diagnostics. kdb_init_flihs done Real memory size = 2048 M Bytes Model = 0800004C Data cache size = 32 K Bytes Inst cache size = 32 K Bytes .......... The client has all the resources allocated to be installed. Could anyone please help me in fixing this issue. -------- Welcome to AIX. check over here
http://publib.boulder.ibm.com/infoce...pha6/diag1.htm 608 Attempting to retrieve the client.info file with tftp. Are you using RARP or DHCP? Would like to know if it solved your problem. This is the accepted answer. More Help
Error Code 0608 In Aix
if you have updated the client lpar but not the nim server, it may fail to create a spot from the mksysb. Mine was wrong. I have done another installation to another client in the same subnet of the nim master and it works well. Please i need the step by step on how to go a...
http://www-01.ibm.com/support/docview.wss?uid=isg1IZ21123 Ta, Ram Top Best Answer 0 Mark this reply as the best answer?(Choose carefully, this can't be changed) Yes | No Saving... To get only the network information I'll run : *note – the word 'master' is not in italics. done. Ba01b015 I have checked everything.
How to get LUN ID which is in HEX form to decimal value how to find the LUN ID which is in the Hex form as below to normal decimal value? Join your peers on the Internet's largest technical computer professional community.It's easy to join and it's free. How to scan virus or botnet progrom on CentOS 5.5 Memory Releasing Issue Redhat Linux installation Error Redhat-rhel6 goes hand Red Hat cluster on Vmware User creation What libraries do I http://unix.ittoolbox.com/groups/technical-functional/ibm-aix-l/nim-install-hanging-on-led-0608-1505046 Murugaiah m replied Jun 27, 2012 Check portmap daemon in nim master and restart all the NFS daemons.
Search Forums Show Threads Show Posts Tag Search Advanced Search Unanswered Threads Find All Thanked Posts Go to Page... unix and linux commands - unix shell scripting NIM install Led 611 Failure Mount Once again we'll look at the 'lsnim -l' output of the NIM master and client. To get only the network information I'll run : *note – the word 'master' is not in italics. Everything is exported properly.
Bootp Request Retry Attempt
If this client was defined on any other NIM network, that might be the source of my bootp (or possibly a different NIM boot) failure. http://www.tek-tips.com/viewthread.cfm?qid=1383591 Using a fresh SPOT(from lpp source) works fine (1) Installing Network Adapter Driver in Redhat Linux 5.5 Server (1) iofencing (1) IOO parameter (1) IPMP (6) Is It Necessary to Restart Error Code 0608 In Aix Starting NODE#000 physical CPU#008 as logical CPU#008... 888 102 700 0c5 check the network if1 = ent-Network3 # lsnim -l master |grep if1 if1 = master_net shadoebso.austin.ibm.com 00145EB7F3F5 The master's network object name is "master_net".
Nim Resource 0042-081 m_mk_lpp_source Error ALT_DISK rollback.. http://megavoid.net/error-code/error-code-006.html Make sure the command string is correct for the bootps line : bootps dgram udp wait root /usr/sbin/bootpd bootpd /etc/bootptab Many times network admins will comment out bootp for security reasons. I have rechecked the network used by the client and is correctly defined. When SPOT is created from mksysb, installation hangs on 0608. Response To The First Bootp Request Was Not Received
The ping test is successful but when I launch the isntall it hangs on 0608 I have checked the /etc/bootptab file and is correct. aixsupport replied Jul 2, 2007 hi guys, they have close the connection between the vlan used by the nim server on it's primary ethernet card and the client so it is You will actually use the word 'master' in this case – not the hostname of the NIM master. # lsnim -l master |grep if1 if1 = master_net shadoebso.austin.ibm.com 00145EB7F3F5 The master's this content done.
Once it has been removed you can correct it by running the following command : # smitty nim_mkdroute Here you'll select the network name and enter the correct default gateway address, Attempting To Retrieve The Client.info File With Tftp Watson Product Search Search None of the above, continue with my search Troubleshooting NIM LED hangs Technote (troubleshooting) Problem(Abstract) This document covers bootp/tftp problems, LED 605, 607, 608, 611, 613, and USB Drive Mount Steps - HP UNIX We have an HP-UX 11.23 U ia64 server.
Once the LED 608 hang hits you'll see something similar displaying several times as it continues to try to bypass the LED 608.
Execute the following on the NIM master. # cd /etc # stopsrc -g nfs # mv exports exports. # rm rmtab xtab # cd /var/statmon # rm -rf ./sm ./sm.bak ./state That is held with the “if1” attribute. All rights reserved. Nim Mstate Not Running If your nim server is on 6 and your clients on 5, make sure you update the nim server to latest TL/SP, there are several issues with aix 6 and building
To verify bootp is running execute the following : # lssrc -t bootps Service Command Description Status bootps /usr/sbin/bootpd bootpd /etc/bootptab active Make sure the command is listed as “/usr/sbin/bootpd” and By Ramana Top Best Answer 0 Mark this reply as the best answer?(Choose carefully, this can't be changed) Yes | No Saving... Everything is exported properly. have a peek at these guys RE: LED 0608 victorv (Vendor) 22 Jul 03 07:04 hi,you can find it in many sites on internet; one ishttp://nscp.upenn.edu/aix4.3html/aixprob/msgdnref/3digit6x.htmtftp : trivial ftpis used in nim to unload boot image to
Home | Invite Peers | More UNIX Groups Your account is ready. You will actually use the word 'master' in this case – not the hostname of the NIM master. # lsnim -l master |grep if1 if1 = master_net shadoebso.austin.ibm.com 00145EB7F3F5 The master's